Worm Reduction Gear Box in Kanpur, Uttar Pradesh

AG Type Single Reduction Worm GearBox

ANUBHUTI the brand name of since : 1991 the company product are very well accepted all over India.

ANUBHUTI Manufacturer of worm reduction Gear unit and other mechanical power transmission equipment.

ANUBHUTI  Gear worm reduction Gear units are different types such as a universal type(Horizontal,Oval Driven,Vertical upward & down ward type.)Horizontal type (solid foot mounting type)to transmit minimum 0.5 HP and maximum 60 HP with selection of correct sizes. Normally available in reduction ratio at 5:1,7.5:1,10:1,15:1,20:1,25:1,30:1,40:1,50:1,60:1,70:1, and also higher ratio from 100:1 to 4900:1 for double reduction Gear unit (compound gear box unit) can be given on specific inquiries. Apart from that we also make hollow shaft mounting gear box. adaptable type & even tailor made also to meet your requirement. All the units offer continues load carrying capacity,silent operation and complete reliability.

Specifications

Whenever they can be applied in material and construction,they made almost to I.S. 3734 – 1966 for worm gearing or DIN or latest ISI standard.

Guarantee:- ANUBHUTI  worm reduction gear unit if any gear is becoming defective within guarantee period the same will be repaired or replaced free of charge provided it is sent to our work on site carriage paid. Any defect caused by accidend on transmits or misuse is not covered by guarantee.

TESTING INSPECTION :- All gearboxes are tested up 5 hours on no load to check oil leakage, noise level & temperature.

Gear Housing:- Gear Housing is made of high quality close cast iron,large cooling Fins on both side to increase efficiency. All joint are made of prevent oil leakages and the bearing Housing are accurately bored to ensure corect alignment.Worm:- The Worm is solid with shaft is made of high grade steel so as to give hard wear resisting surface. The bearing & oil seal journal are accurately,cylindrically ground to give smooth running.Worm – Wheel:- It is made of centrifugally cast phosphorus Bronze rim shrunk and keyed on cast-iron centre block for bigger units and solid casting for smaller units.Wheel Shaft:– The wheel shaft is made of high tensile carbon steel. It is of large diameter to carry the torsional as well as bending loads which may be induced overhung drives.Bearing:- The worm & worm wheel shaft are supported on taper roller or angular contact bearings of ample capacity so as to take journal and thrust load.

Oil Seal:- Best quality of oil seals are used.

Cooling:- Air cooling is effected by means of standard polypropylence or metal fan which direct a continuous flow for air over the robbed surface of the case. The fan is designed to operate in both direction of rotation and is so arranged in conjunction with the ribbing of the case so as to allow maximaum heat dissipation.

Quick Contact!

+91 98256 76758
+91 90818 27474

Get Inquiry Now

    Key Features of Helical Gear Box

    • High Torque OutputCapable of transmitting high torque, making it ideal for heavy-duty applications.
    • Compact DesignSpace-efficient construction allows integration into limited spaces without sacrificing performance.
    • Self-locking MechanismPrevents reverse motion, enhancing safety and reliability in load-holding applications.
    • Smooth and Quiet OperationWorm Gear Box is Angled worm design ensures low vibration and noise during operation.
    • High Reduction RatiosOffers a wide range of speed reduction options for diverse industrial requirements.
    • Durable ConstructionBuilt with robust materials to withstand high loads and provide long-lasting performance.

    Applications of Helical Gear Box

    • Material Handling Equipment
    • Automotive Industry
    • Mining Equipment
    • Textile Machinery
    • Food Processing
    • Agriculture
    • Renewable Energy

    AG Type Single Reduction Worm Gearbox Technical Specification

    SIZE HORIZONTAL MOUNTING CLEARANCE DIMENSIONS
    A B C D E F C1 D1 F1 G H J K L M N P G1
    AG 1.75 136 116 114 92 12 11 114 92 11 57 44.45 70 171.45 117.5 117.5 235 108 —
    AG 2 142 127 100 100 14 11 100 100 11 68 50.8 80 198.8 133 133 266 128 94
    AG 2.25 147 132 105 105 14 11 105 105 11 70 57.15 85 212.15 142 142 284 136 100
    AG 2.5 162 137 115 110 14 11 115 110 11 70 63.5 88.5 222 150 150 300 143 115
    AG 3 182 192 140 160 20 14 140 160 14 102 76.2 105 283.2 161 161 322 175 125
    AG 3.5 220 200 155 160 22 16 160 90 M16 105 88.9 111.1 305 200 210 410 200 128
    AG 4 250 200 180 160 25 18 200 100 M16 108 101.6 115.4 325 215 225 440 215 140
    AG 5 295 252 220 200 30 18 240 130 M16 118 127.0 140 385 242 250 492 235 164
    AG 6 350 302 266 241 32 23 280 150 M20 127 152.4 170.6 450 279 301 580 274 178
    AG 7 400 340 306 266 36 23 320 150 M20 146 177.8 200.2 524 311 345 656 287 200
    AG 8 440 340 343 266 40 27 340 160 M24 146 203.2 225 574.2 342 368 710 312 220
    AG 9 490 344 390 282 40 27 386 180 M24 154 228.6 252.4 635 375 401 776 325 240
    AG 10.5 590 430 432 330 50 33 440 220 M30 172 266.7 281.3 720 450 475 925 352 260

     

    SIZE SHAFT END DIMENSIONS VERTICAL FLANGE DIMENSIONS AVERAGE NET
    WEIGHT KG.    		 APPROX. OIL
    CAPACITY LITRES
    S T U V W X S1 T1 U1 V1 W1 Y A1 B1 E1
    AG 1.75 16 35 32 18 5 — 22 45 42 25.5 6 — — — — 11.400 0.500
    AG 2 16 47 40 18 5 — 25 55 50 28 8 — 150 120 14 14.300 0.500
    AG 2.25 22 50 45 25 6 — 25 60 55 28 8 — 150 120 14 17.900 1.000
    AG 2.5 22 50 45 25 6 – 25 65 55 28 8 – 165 135 14 20.600 1.000
    AG 3 25 50 45 28 8 M8 38 75 70 41 10 M12 240 200 16 37.600 2.000
    AG 3.5 30 65 60 28 8 M8 38 90 85 41 10 M12 260 220 18 47.500 2.500
    AG 4 32 65 60 35 10 M12 45 90 85 48.5 14 M16 280 235 20 67.200 3.000
    AG 5 35 70 65 38 10 M12 50 100 95 53.5 14 M16 320 260 22 106.300 5.000
    AG 6 38 75 70 41 10 M12 58 114 111 62 16 M20 340 270 25 160.100 10.000
    AG 7 40 82 79 43 12 M16 65 120 115 69 18 M20 400 320 40 197.100 13.000
    AG 8 45 88 85 48.5 14 M16 70 140 137 74.5 20 M20 440 360 40 259.000 15.000
    AG 9 50 95 92 53.5 14 M16 75 145 140 79.5 20 M20 490 410 40 318.500 22.000
    AG 10.5 60 115 110 64 18 M18 80 150 147 85.5 22 M20 560 460 40 480.000 35.000